1. FLEX Rack Refrigeration System

Capacity: 20 - 100 HP

FLEX Refrigeration Condenser with Digital Compressor Units. This is a great investment because it will save electricity and will require less maintenance.

Suitable for application of large-scale facility like cold storage, supermarket, etc.

Model #:

FLEX A: For Low Temp Applications

FLEX B: For Medium Temp Applications

FLEX Combination: For Low and Medium Temp Applications

2. FIX Refrigeration System

Capacity: 5 - 20 HP

 

For Medium and Low Temp applications.

Suitable for application in small-scale facility like convenient store, etc.

3. Lasercut Parts

We can cut complicated details. Our team of Mechanical Design Engineer and Laser Process Engineer can provide you the product that you desire with quick turn around time.

Machine capacity: 

  • Mild Steel: max 0.62 in

  • Stainless Steel: max 0.31 in

  • Copper: max 0.059 in

  • Brass: max 0.051 in

  • Aluminum: max 0.25 in

4. Freezer Curtain

Our new hook design can make sure your curtains stay in place when forklifts pass by, which is a common problem for traditional curtains.

We can customize curtain to the curvature of the wall as shown. 

5. Freezer/Cooler Doors 

Custom Slide/Swing or Standard One Size

 

NSF Certifications

(C0549749 & C0549750)

Our Freezer Doors are sturdy and durable, which can be used with or without floor insulation. With updated technology, our doors can automatically close without pressing. 

Model a: SW(1)(2)(3)(4)-(5)(6)(7)

 

Size (H x W): (from 77" to 86") x (from 30" to 60")

(1): Door material (AL for Aluminum, AW for Aluminum with white coating, and SS for Stainless Steel)

(2): number of sides around the Swing doors (3 for door with 3 sides that is without floor insulation, 4 for door with 4 sides that is with floor insulation). For Slide Doors, it will always be 4 sides.

(3): door functioning (C for Cooler and F for Freezer)

(4): foam thickness (4 for 4 inches, 5 for 5 inches, and 6 for 6 inches of insulated foam)

(5): door dimensions (Width x Height in inches)

(6): side of the hinge for Swing Doors (S should be replaced with LH for left hinge and RH for right hinge. It is determined by standing facing the front of the door).

(7): for doors with diamond plates at the bottom of the front and the back side. For kick in purpose (optional for Swing Doors only. Slide doors do not need kick plate)

Model b: SL(1)(2)(3)(4)-(5)(6)

Size (H x W): min size is 86" x 60" to maximum size is 120" x 120"

(For Door size that is larger than 86" x 60", they should only use Slide Doors, cause Swing Door with that size will be very bulky and too heavy for the door accessories to hold together).

(1): Door material (AL for Aluminum, AW for Aluminum with white coating, and SS for Stainless Steel)

(2): number of sides around the Swing doors (3 for door with 3 sides that is without floor insulation, 4 for door with 4 sides that is with floor insulation). For Slide Doors, it will always be 4 sides.

(3): door functioning (C for Cooler and F for Freezer)

(4): foam thickness (4 for 4 inches, 5 for 5 inches, and 6 for 6 inches of insulated foam)

(5): door dimensions (Width x Height in inches)

(6): Side of open for Slide Doors (S should be replaced with LO for Left Opening and RO for Right Opening)

 

Address: 12130 Antoine Dr, Suite B1, Houston, TX 77066

Email: coolref@outlook.com

© 2020 by COOLREF LLC. 

Technical Information